 |
Purified Steam Sampling Unit |
The unit consists of a cooling coil with an integral diaphragm valve for sampling. Prior to taking a sample, simple sterilization of the unit is possible. By regulating the internal cooling circuit with the integral diaphragm valve, the operator can control the temperature of the purified steam condensate. The diaphragm valve is also the isolation valve to shut off the cooling circuit.
All process connections are butt weld as standard in order to integrate the unit easily into the process system. Upon request, other end connections are available.
GMP conform purified steam sampling unit for stationary and mobile use
- Integral diaphragm valve for sampling
- Unit easy to sterilize
- Minimized dead leg and completely self-draining
- High-grade stainless steel 1.4435/316L
Features
- High condensation performance
- Time-saving sampling
- Compact design
- Tube end connection according to standard specification
- Integral sampling and control valve for cooling circuit
- Easy installation due to standardized compact design
- Unit for mobile use
Technical Data
| Cooling performance: | Approx. 0,5 l/min. (0,13 gpm)*1 | |
| Condensate temperature: | 30°C (86°F)*2 | |
| Maximum working pressure vessel: | 10 bar (145 psi) | |
| Maximum working pressure cooling helix: | 10 bar (145 psi) / -0,9 bar (-13,05 psi) | |
| Maximum temperature cooling helix: | 150°C (302°F) / 3,74 bar (54,24 psi) | |
| Content (volume) cooling helix: | 0,125 l (0,033 gal) | |
| Weight: | 6,5 kg (14,33 lb) |
*1 value is related to 139°C (282°F) / 2,5 bar (36,26 psi) steam temperature and cooling water temperature 10°C (50°F) at a flow rate of 25 l/min (6,06 gpm)
*2 depending on media temperature and flow